When you want to find fireplace fan heat powered, you may need to consider between many choices. Finding the best fireplace fan heat powered is not an easy task. In this post, we create a very short list about top 10 the best fireplace fan heat powered for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 fireplace fan heat powered:
Best fireplace fan heat powered
1. VODA 4-Blade Heat Powered Stove Fan for Wood/Log Burner/Fireplace Increases 80% More Warm air Than 2 Blade Fan- Eco Friendly
FeatureHeat powered - no batteries or electricity required.
Efficiently circulates warm air throughout the room.
Less consumption, more efficiency.
Innovative and durable design.
Description1.The fan base and blade are made from anodized aluminum which will not rust or corrode. This stove fan has been designed to deliver a very broad thermal current.
2.The stove fan generates its own power by the heat from the stove .
3.The strip of metal in the base of the fan is a Bi-metallic strip designed to raise the edge of the fan slightly as the maximum operating temperature is approached.
4.Operating above the recommended temperature of 660 F / 350 C may damage the fan and the electricity generating units.
5.Keep fan away from small children when in use.
: 1.Position the stove fan on a smooth flat surface of your stove top near the side or back of the stove.
2.The hotter the stove is, the more air the fan circulates.
3.The stove fan is designed for usage on freestanding stoves with a normal surface temperature of between 185 F - 660 F (85 C - 350 C).
4.Remove the fan from the stove if the temperature exceeds of 660 F / 350 C
5.Never handle the base of the stove fan, do not set the stove fan down on an unprotected surface when hot.
6.To move or carry the fan, always use the extendable handle while wearing gloves
7.Good stove safety practice includes the use of a stove thermometer.
2. VonHaus 4-Blade Heat Powered Wood Stove Fan with Temperature Gauge - Ultra Quiet Fireplace Wood Burning Eco Fan for Efficient Heat Distribution Black
FeatureHEAT POWERED: No batteries or electricity needed - a thermoelectric module acts as a small generator to power the fan's motor and push the heat around the room. Includes a magnetic temperature gauge to monitor the heat and stove fan performance
ECONOMICAL: increases the efficiency of your freestanding stove heater/pellet heater or wood log burner to generate warmth
OPERATES automatically between 140 - 660F with speed self-regulating according to the temperature in the room. Circulates 150 - 190 CFM
NO INSTALLATION: Compact and no installation required. Black Steel construction with 4 large blades and carry handle
OVERALL SIZE: 9" x 6.5" x 3.7 inches. Each blade measures: 3.1" x 2.9" inches. Do not operate in conditions exceeding the maximum working temperature of 660C - incorrect use of the stove fan could damage the product.
DescriptionVonHaus 4 Blade Stove Fan Increase the efficiency of your stove oven or wood/ log burner with the VonHaus 4 Blade Fan. There's no need to turn up the heating or switch on an electric radiator to heat your home up - this manual eco fan creates its own energy and is powered entirely by heat. This means no need to constantly pay out for expensive batteries or worry about running up a high electricity bills. How It Works The science behind this fan is simple but highly effective. The fan comes fitted with a thermoelectric module which acts as generator to power the fan's motor - this starts up once the module detects a minimum temperature of 50C, at which point it begins circulating warm air around the room. Automatic Regulating Heat Thanks to a rapid fan speed of 1600 rpm max., which circulates between 150 - 190 CFM (cubic feet air/ minute) you'll feel the benefits in no time at all. Self-regulating design automatically adjusts depending on the temperature in the room - speeding up as the temperature rises and slowing down as it begins to drop. Premium Black Steel Premium black steel construction features four large blades for maximum airflow plus a carry handle for hassle-free portability. This portable stove fan is perfect for wood heaters and distributing heat around the home, kitchen ad garage. Extremely quiet - won't disturb the household when in use. No installation required - just place on top of your stove. Suitable for use with most styles of freestanding stoves and wood/ log burners. Specification Air Flow: 150 - 190 CFM Working Temperature: 140 - 660F Blade Size: 3.1" X 2.9" inches
3. Sonyabecca Stove Fan 8 Blade Twin Motor Heat Powered Wood 138mm Height Fireplace Fan 31% Fuel Cost Silent for Insert Fireplace Fans
Feature8 BLADE TWIN MOTOR: Upgrade 8 blades, double motors, blow wind up to 430 ft/m, air flow range up to 430CFM, diffusing warm air throughout the whole room. Just place the stove fan on a smooth flat surface of your stove top ,near the side or back of the stovepipe. Need to place stove fan at least 4" away from stovepipe. It will work when the stove surface hot.
HEAT POWERED: Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, eco-friendly.
50C(122F)-340C644F) WORKING TEMPERATURE: The fan spins when the temperature is reached 50C(122F).The hotter the base of the fan gets, the faster the fan turns, and the more air the fan circulates into the room. It will slow down and stop as the stove cools. Also come with a magnetic thermometer to monitor temperature.
ANODIZED ALUMINUM MATERIAL&OVER HEAT PROTECTION: The whole fan is made from anodized aluminum, which will not rust or corrode when the fan is getting hot. There is iron sheet on the stove fan bottom, well protect fan from damage due to high temperature.
SILENT OPERATION: As the stove warms up, the wood fireplace Stove fan runs faster and faster, distributing the heat to the far corners of the room. And even at top speed, there is hardly a whisper. It's almost totally silent.(The stove fan makes less than 25 dB even going hard).
DescriptionWhy do I need a mini stove fan? The stove fan work without any batteries, so operate for free. It equalizes the warmth produced from your wood burning stove around the room, that's why a stove fan is a great idea.
Stove fans range in price and quality of functionality. If you want to push the hot air from your wood stove around the space more effectively then a stove fan is a really good idea.
Many homes here have classical install iron fireplaces that have a limited space on the top. However,many stove fans in the market are not suitable for these homes.Now Sonyabecca extra mini stove fan which height is 13.7cm to meet their requirement.
How to use? Position the stove fan on a smooth flat surface of your stove top ,near the side or back of the stovepipe. The hotter the stove surface is, the more air the fan circulates.
1)Circulates warm air throughout the room
2) Powered by heat, speed automatic controlled by temp of stove top
3) No batteries needed,no running cost, eco-friendly
4) 4 blade,fast spinning speed
5)Start to work at temperature 50C(122F)
6) Safe, built-in protection system to stop them overheat
7) Silent operation, no noise, just warmth
- Material: Anodized aluminum
- Fan Height: 13.7cm/5.39inch
- Fan base(LxW): 13 x 7.5cm/5.12 x 2.95inch
- Blade length: 9cm/3.54inch
- Air flow: 430CFM(Max)
- Running speed: 1970RPM(Max
- Silent operation, the noise less than 25dB
- Magnetic stove thermometer: Diameter: 6.5cm/2.6inch, monitor temp from 100-900F(37.7-500C)
Never handle the base of the stove fan, do not set the stove fan down on an unprotected surface when hot.
To move or carry the fan, always always use the extendable handle while wearing gloves.
Please keep fan away from small children when in use.
1 X Sonyabecca Stove Fan
1 X Magnetic
4. KINDEN Fireplace Fans 4-Blade - Heat Powered Stove Fan for Wood Log Burner Ultra Quiet Increases 80% More Warm Air than 2 Blade Eco-Friendly with Stove Thermometer (Aluminium Black,Large Size)
Feature[No Electricity Needed]: Generate power by converting the heat from your fireplace or wood-burning stove. Highly effective at distributing heat throughout the entire house nicely. Never need to turn it on or off.
[Updated Model 2017]: 4-Blade increases 80% more warm air than 2 blade, fan starts to rotate when temperature reach 50C(122F), The hotter the fire, the faster the blades turn.
[High Temperature Protection Shrapnel]: The fireplace fans can withstand 360C(680F) high temperature, there is high temperature protection shrapnel at the bottom, full oxidation of the fuselage, high temperature does not change color.
[Whisper Quiet]: The noise less than 36DB, extremely quiet while working. Say good-bye to the loud noise of electric-forced fans! You won't even know the fan is there, but you'll feel warm all the time.
[Maintenance Free]: Just dust it off occasionally, and put some light oil on the blade shaft to keep it spinning smoothly and quietly! 1-year Warranty.
5. CWLAKON Heat Powered Stove Fan-2018 Upgrade Designed Silent Operation 4 Blades with Stove Thermometer for Wood/Log Burner/Fireplace-Eco Friendly and Efficient Heat Distribution(Black)
FeatureStart Automatically2018 Upgrade Technology,Reinforced 4 Blades,Faster Speed,Larger Air Volume.The heat powered stove fan is designed to circulate the warm air created by a wood / coal or pellet burning.Efficiently circulates warm air throughout the room.
Eco-Friendly and Self-PoweredThermoelectric module acts as a small generator to power the fan's motor. No batteries or electricity required! Improved warm air circulation results in greater comfort and reduce wood consumption from your stove.Stove operating with normal surface temperatures between 122F(50C) and 716F(380C).[Energy Class A+++]
Whisper QuietNewly Designed Blade,Larger Air Volume,Lower noise.You don't even know the stove fan is there,but you feel the warmth!You will enjoy the warm air in a quiet and comfortable environment.
Safty DesignThe stove fan support is made with Anodized Aluminum, able to resist high temperature up to 662F(350C), no deformation and no discoloration even after long time working under high temperature.
Longer LifetimeThere is a Bi-metallic safety device in the base of the fan.If the surface temperature rises above around 400F (200C),the safety device gently elevates the front of the fan to protect the TEG and motor.2-Year Warranty
1 x Heat powered stove fan
1 x Stove Thermometer
* Material: Anodized Aluminum
* Starting Temperature: 50C (122F)
* Max Working temperature: 350C (662F)
* AirFlow: 280-360CFM (cubic feet per minute)
* Noise: < 32dB
* Height: 190mm
* Width: 110mm
* Weight: 547g/800g(Inc. color box)
* Color: Black
* Running RPM:1350RPM
* Magnetic Stove Thermometer:Diameter 63mm,monitor temp from 70-900F(40-500C).(+/- 10%),placed on the stove top or side,or single wall pipe.
Heat Powered Stove Fan for Fireplace:
* The fans spins according to the heating temperature setting on the fireplace.
* Spreads heat out into the room instead of straight up to the top of the ceiling.
* Doesn't require electricity, heat driven, helps circulate warm air within the room from the corner and by the chimney into more of the room.
* Postion the fan on a smooth, flat area of the top of the stove. It will not fall off due to the stable base.
* Works on Wood, Gas or Pellet Stoves.
* Stands approximately 8.85" tall on top of the stove. This sleek design takes up very minimal space.
* This is the fan for you! Anyone with a wood stove needs this. No electric expense, runs for free, totally energy-saving and economical.
Just dust it off occasionally, and put some light oil on the blade shaft to keep it spinning smoothly and quietly!
Never handle the base of the stove fan, do not set the stove fan down on an unprotected surface when hot.
To move or carry the fan, always use the extendable handle while wearing gloves. Please keep fan away from small children when in use.
Click add to cart and buy the Best Heat Powered Stove Fan today.
6. Caframo 812AMXBX Limited AirMax Ecofan
Feature175 cubic feet per minute
Creates its own electricity
Circulates warm air through the room
Greater airflow at higher stove temperatures
No assembly required
DescriptionThe Ecofan AirMax model 812 produces the highest airflow over a wider range of stove surface temperatures. For use on freestanding wood stoves with a surface temperature between 185 DegreeF- 650 DegreeF (85 DegreeC- 345 DegreeC). The Ecofan Airmax is an economical way to move air throughout your living space. Creating its own electricity and pushing up to 175 cfm (cubic feet per minute) this fan is ideal for those living off the grid or looking to increase the efficiency of their stove and use less fuel. Whisper quiet and completely assembled, these fans make for a great gift. Two year warranty.
7. TOMERSUN 3 Blades Heat Powered Stove Fan for Wood/Log Burner/Fireplace
FeatureCompact Size--8.7 x 6.7 x 3.6 inches,the material is aluminum.
No Batteries or Electricity required--The stove fan uses heat from the stove surface to spin,adjust its speed automatically with the stove surface temperature.
Longer lifetime--There is a Bi-metallic safety device in the base of the fan.If the surface temperature rises above around 300,the safety device gently elevates the front of the fan to protect the TEG and motor.
Whisper-quiet--The only moving part is the blade assembly.You don't even know this fan is there,but you FEEL the WARMTH!
Less Consumption ,More Efficiency--Reduce the fuel consumption and make the room warmer quickly.
DescriptionHow is working?
The stove fan generates its own power by the heat from the stove. The fan uses thermoelectric technology to convert a temperature difference into electricity. At the center section of the fan base is a unique thermoelectric module. The module change the heat into the electricity.
How to use?
Position the stove fan on a smooth flat surface of your stove top ,near the side or back of the stovepipe.The hotter the stove surface is, the more air the fan circulates.
Recommended surface temperature is between 185F - 660F (85C - 350C). Temperatures above this range may damage the fan and the electricity generating units and invalidate your warranty.
Never handle the base of the stove fan, do not set the stove fan down on an unprotected surface when hot.
To move or carry the fan, always use the extendable handle while wearing gloves .
Keep fan away from small children when in use.
What if you have questions or concerns?
Our Customer Care Team is available and ready to assist you. Simply email us with your Order# and we'll get back to you within 24 hours.
Recommend buying 2 pieces to take full advantage of the heat from the stove.
8. The Three Musketeers 4-Blade Heat Powered Wood Stove Fan - Ultra Quiet Fireplace Wood Burning Eco-Friendly Fan Efficient Heat Distribution Black
FeatureTTM HEAT POWERED STOVE FAN - increases the efficiency of your freestanding stove oven or wood/ log burner to generate warmth economically.
ECO-FRIENDLY AND SELF-POWERED - a thermoelectric module acts as a small generator to power the fan's motor. No batteries or electricity required.
SAVE ENERGY: Tested and proven to save you up to 12% in fuel with more efficient distribution of heat from your wood stove. Improved warm air circulation results in greater comfort and less fuel consumption from your stove.
OPERATES AUTOMATICALLY BETWEEN 50 - 350C -self-regulating speed according to the temperature in the room. Circulates 150 - 180 CFM.
BLACK ALUMINIUM CONSTRUCTION - extremely quiet operation, compact size, no installation required. Black aluminium construction with four large blades and carry handle - Size: 4.5" x 7.5" x 3", weight: 0.55kg.
DescriptionTTM Fireplaces Stove Top Fan
If you own wood burning stove and you would like to get MORE HEAT throughout your room but you DO NOT want to spend more money on electricity - all you have to do is get one of these amazing heat powered stove fans, and you will be warm for FREE! - this manually operated fan generates its own energy and is powered by heat alone - no batteries or electricity required.
How does it works without batteries:
It seems impossible, but this fan runs without batteries or electricity. As the base of the fan heats up, the metal in the bottom of the unit warms along with a heat sensitive spring. Meanwhile, the temperature of the different metals in the unit's top surface is kept down by the fans cooling fins. When the heat sensitive spring reaches a sufficient temperature it tilts the unit forward, bringing the two layers of metal together. This creates the electrical pulse that turns the blade on the fan. The greater the differential in temperature of the metals, the greater the electrical output, meaning that your fan turns faster the more the stove (and therefore the base of the fan) heats up.
Where should I place the Fan?
Placement of the fan is critical to optimum performance. It should be positioned at the rear of the stove. This allows heat to be absorbed into the base and upwards. The fan should not be placed at the front of the stove or near the stovepipe.
The stove fan is designed for usage on freestanding stoves with a normal surface temperature of between 50 and 350 degrees Celsius. Temperatures above this range may damage the fan and the electricity generating units and invalidate your warranty. Good stove safety practice includes the use of a stove thermometer.
Your satisfaction is very important for us. If you have any issue with our products, please feel free to contact with us anytime. We will find out a satisfactory solution to you within 48 hours.
9. 17% Fuel Cost Saving Original Top Heat Powered Eco Stove Fan 4 Blade Aluminum Black for Gas Coal Pellet Log Wood Burner Fireplace Oven Heater Fire Burnning
FeatureA stove fan to circulate heat throughout the whole space,a thermometer to monitor temperature,1 year international warranty
Compact design: height only 189mm to fit the tightest of spaces,Inbuilt protection system to stop them overheat
Fast start from temp 50C(122F),do not exceed 350C(662F). Do not put in front of the chimney,the high temperature may cause damage.The optimum position is at the side or back part of the stove top.
The fan is heat powered,if your stove is heat insulation on the top,please do not buy,the fan will can't work efficiently or even totally can't work on your stove.
Please note that it doesn't operate like a electric blower fan.When you use a electric blower fan on your stove,you may feel breeze as you stand in front of it.With this heat powered fan,you don't notice the breeze but will feel the overall room temperature rise.It silently moves the air above the surface of the stove increasing the efficiency without using electricity.So please do not take it as a product quality problem.
The design of Heat Powered Stove Fan N429 is more attractive,the size fits almost all freestanding stoves. No electricity required,just place it on the top of your stove,with a surface temperature between 50-350C (122-662F),the fan will create its own electricity with the heat and circulate warm air 220CFM (cubic feet per minute) throughout the whole room with 17% fuel cost saving.
1) Circulates warm air throughout the room
2) Powered by heat,speed automatic controlled by temp of stove top
3) Don't need electricity,no running cost
4) Compact design,height only 189mm
5) Start to work at temperature 50C(122F)
6) Safe,its inbuilt protection system to stop them overheat
7) Maximizes efficiency of stove
8) Silent operation,no noise,ready to use out of box
9) Eco-friendly,reduce emissions of stoves
- Material: Anodized Aluminum
- Product Dimension: Height189mm,Width180mm
- N.W.: 0.5kg
- Color Box Size: 17cm x 11cm x 20cm
- Starting Temp:50C(122F)
- Maximum operating temp 350C(662F)
- Optimum operating range:80-250C(176F-482F)
- Air Flow:220CFM
- Starting Up Time(200C):28-50 Sec
- Running RPM:900RPM
- Silent operation,the noise less than 25dB
- Warranty:12 months
- Magnetic Stove Thermometer:Diameter 63mm,monitor temp from 100-800F(40-425C).(+/- 10%),placed on the stove top or side,or single wall pipe
What to Do If Noise
If there is noise caused by the spinning fan,please check the fan blade,normally it because the blade is a little bent,rotate the blade with your finger,find the bent part,fix it to the right position by hand,no tool needed.Sometimes it still happened after shipping.As the blade is aluminum,not iron or other hard materials,so it's also very easy to be fixed.
10. Ecofan 810CAKBX UltrAir Mid-Size Heat Powered Wood Stove Fan, Made in Canada, Nickel
FeatureWarm your room up to 31% faster with the mid-sized Ecofan model, the Ecofan UltrAir
Ideal for rooms up to 240 square feet, the UltrAir circulates more warm air further into your room!
Tested and proven to save you up to 14% in fuel with more efficient distribution of heat from your wood stove
No electricity needed, Ecofans generate power by converting the heat from your wood stove into electricity
Designed and manufactured in Canada for over 20 years, Ecofans have been tested in the harshest winters and come with a 2 year limited warranty